LED STRIP – UP/DOWN WALL AND CEILING LIGHTING
In this example we are using Up/Down aluminium profile to light up the low wall and sloping skeiling (yes skeiling not ceiling!) of a large bedroom in a country cottage.
The LED Drivers necessary are concealed in the roof space above and 12 volt cables run down to the corner where needed.
Here’s an image showing the connection between the 12 v cables and the LED Feed-In. It can all be neatly concealed for a clean finish.
Here’s an image showing both the upper and lower LED tapes connecting to the same driver.
Control for dimming is via Wall Mounted rotary wheel and wireless remote
All this is available from Toplightco!